Tutorial: Conditions in bash scripting (if statements)

Always terminate the line before putting a new keyword like "then". The words if, then, else, elif and fi are shell keywords, meaning that they cannot share the same line. Put a ";" between the previous statement and the keyword or place the keyword on the start of a new line. Bash will throw errors like "syntax error near unexpected token `fi'" if you don't.

It is a good habit to quote string variables if you use them in conditions, because otherwise they are likely to give trouble if they contain spaces and/or newlines. By quoting I mean:
 

if [ "$stringvar" == "tux" ]; then

There are a few cases in which you should not quote, but they are rare. You will see one of them further on in the tutorial.

Also, there are two things that may be useful to know:
 

1. You can invert a condition by putting an "!" in front of it. Example:
    

   if [ ! -f regularfile ]; then

   Be sure to place the "!" inside the brackets!
2. You can combine conditions by using certain operators. For the single-bracket syntax that we've been using so far, you can use "-a" for and and "-o" for or. Example:

   if [ $foo -ge 3 -a $foo -lt 10 ]; then

   The above condition will return true if $foo contains an integer greater than or equal to 3 and Less Than 10. You can read more about these combining expressions at the respective condition syntaxes.

And, one more basic thing: don't forget that conditions can also be used in other statements, like while and until. It is outside the scope of this tutorial to explain those, but you can read about them at the Bash Guide for Beginners.

Anyway, I've only shown you conditions between single brackets so far. There are more syntaxes, however, as you will read in the next section. 

Different condition syntaxes
 

Bash features different syntaxes for conditions. I will list the three of them:

1. Single-bracket syntax

This is the condition syntax you have already seen in the previous paragraphs; it's the oldest supported syntax. It supports three types of conditions:

• File-based conditions
  • Allows different kinds of checks on a file. Example:
     

    if [ -L symboliclink ]; then

    The above condition is true if the file 'symboliclink' exists and is a symbolic link. For more file-based conditions see the table below.
• String-based conditions
  • Allows checks on a string and comparing of strings. Example one:
     

    if [ -z "$emptystring" ]; then

    The above condition is true if $emptystring is an empty string or an uninitialized variable. Example two:
     

    if [ "$stringvar1" == "cheese" ]; then

    The above condition is true if $stringvar1 contains just the string "cheese". For more string-based conditions see the table below.
• Arithmetic (number-based) conditions
  • Allows comparing integer numbers. Example:
     

    if [ $num -lt 1 ]; then

    The above condition returns true if $num is less than 1. For more arithmetic conditions see the table below.

2. Double-bracket syntax

You may have encountered conditions enclosed in double square brackets already, which look like this:

if [[ "$stringvar" == *string* ]]; then

The double-bracket syntax serves as an enhanced version of the single-bracket syntax; it mainly has the same features, but also some important differences with it. I will list them here:  

• The first difference can be seen in the above example; when comparing strings, the double-bracket syntax features shell globbing. This means that an asterisk ("*") will expand to literally anything, just as you probably know from normal command-line usage. Therefore, if $stringvar contains the phrase "string" anywhere, the condition will return true. Other forms of shell globbing are allowed, too. If you'd like to match both "String" and "string", you could use the following syntax:

  if [[ "$stringvar" == *[sS]tring* ]]; then

  Note that only general shell globbing is allowed. Bash-specific things like {1..4} or {foo,bar} will not work. Also note that the globbing will not work if you quote the right string. In this case you should leave it unquoted.
• The second difference is that word splitting is prevented. Therefore, you could omit placing quotes around string variables and use a condition like the following without problems:
   

  if [[ $stringvarwithspaces != foo ]]; then

  Nevertheless, the quoting string variables remains a good habit, so I recommend just to keep doing it.
• The third difference consists of not expanding filenames. I will illustrate this difference using two examples, starting with the old single-bracket situation:
   

  if [ -a *.sh ]; then

  The above condition will return true if there is one single file in the working directory that has a .sh extension. If there are none, it will return false. If there are several .sh files, bash will throw an error and stop executing the script. This is because *.sh is expanded to the files in the working directory. Using double brackets prevents this:
   

  if [[ -a *.sh ]]; then

  The above condition will return true only if there is a file in the working directory called "*.sh", no matter what other .sh files exist. The asterisk is taken literally, because the double-bracket syntax does not expand filenames.
• The fourth difference is the addition of more generally known combining expressions, or, more specific, the operators "&&" and "||". Example:
   

  if [[ $num -eq 3 && "$stringvar" == foo ]]; then

  The above condition returns true if $num is equal to 3 and $stringvar is equal to "foo". The -a and -o known from the single-bracket syntax is supported, too.
  
  Note that the and operator has precedence over the or operator, meaning that "&&" or "-a" will be evaluated before "||" or "-o".
• The fifth difference is that the double-bracket syntax allows regex pattern matching using the "=~" operator. See the table for more information.

3. Double-parenthesis syntax

There also is another syntax for arithmetic (number-based) conditions, most likely adopted from the Korn shell:

if (( $num <= 5 )); then

The above condition is true if $num is less than or equal to 5. This syntax may seem more familiar to programmers. It features all the 'normal' operators, like "==", "<" and ">=". It supports the "&&" and "||" combining expressions (but not the -a and -o ones!). It is equivalent to the built-in let command.

Table of conditions

The following table list the condition possibilities for both the single- and the double-bracket syntax. Save a single exception, the examples are given in single-bracket syntax, but are always compatible with double brackets.

1. File-based conditions:
Condition	True if	Example/explanation
[ -a existingfile ]	file 'existingfile' exists.	if [ -a tmp.tmp ]; then     rm -f tmp.tmp # Make sure we're not bothered by an old temporary file fi
[ -b blockspecialfile ]	file 'blockspecialfile' exists and is block special.	Block special files are special kernel files found in /dev, mainly used for ATA devices like hard disks, cd-roms and floppy disks. if [ -b /dev/fd0 ]; then     dd if=floppy.img of=/dev/fd0 # Write an image to a floppy fi
[ -c characterspecialfile ]	file 'characterspecialfile' exists and is character special.	Character special files are special kernel files found in /dev, used for all kinds of purposes (audio hardware, tty's, but also /dev/null). if [ -c /dev/dsp ]; then     cat raw.wav > /dev/dsp # This actually works for certain raw wav files fi
[ -d directory ]	file 'directory' exists and is a directory.	In UNIX-style, directories are a special kind of file. if [ -d ~/.kde ]; then     echo "You seem to be a kde user." fi
[ -e existingfile ]	file 'existingfile' exists.	(same as -a, see that entry for an example)
[ -f regularfile ]	file 'regularfile' exists and is a regular file.	A regular file is neither a block or character special file nor a directory. if [ -f ~/.bashrc ]; then     source ~/.bashrc fi
[ -g sgidfile ]	file 'sgidfile' exists and is set-group-ID.	When the SGID-bit is set on a directory, all files created in that directory will inherit the group of the directory. if [ -g . ]; then    echo "Created files are inheriting the group '$(ls -ld . | awk '{ print $4 }')' from the working directory." fi
[ -G fileownedbyeffectivegroup ]	file 'fileownedbyeffectivegroup' exists and is owned by the effective group ID.	The effective group id is the primary group id of the executing user. if [ ! -G file ]; then # An exclamation mark inverts the outcome of the condition following it    chgrp $(id -g) file # Change the group if it's not the effective one fi
[ -h symboliclink ]	file 'symboliclink' exists and is a symbolic link.	if [ -h $pathtofile ]; then     pathtofile=$(readlink -e $pathtofile) # Make sure $pathtofile contains the actual file and not a symlink to it fi
[ -k stickyfile ]	file 'stickyfile' exists and has its sticky bit set.	The sticky bit has got quite a history, but is now used to prevent world-writable directories from having their contents deletable by anyone. if [ ! -k /tmp ]; then # An exclamation mark inverts the outcome of the condition following it     echo "Warning! Anyone can delete and/or rename your files in /tmp!" fi
[ -L symboliclink ]	file 'symboliclink' exists and is a symbolic link.	(same as -h, see that entry for an example)
[ -N modifiedsincelastread ]	file 'modifiedsincelastread' exists and was modified after the last read.	if [ -N /etc/crontab ]; then     killall -HUP crond # SIGHUP makes crond reread all crontabs fi
[ -O fileownedbyeffectiveuser ]	file 'fileownedbyeffectiveuser' exists and is owned by the user executing the script.	if [ -O file ]; then     chmod 600 file # Makes the file private, which is a bad idea if you don't own it fi
[ -p namedpipe ]	file 'namedpipe' exists and is a named pipe.	A named pipe is a file in /dev/fd/ that can be read just once. See my bash tutorial for a case in which it's used. if [ -p $file ]; then     cp $file tmp.tmp # Make sure we'll be able to read     file="tmp.tmp"    # the file as many times as we like fi
[ -r readablefile ]	file 'readablefile' exists and is readable to the script.	if [-r file ]; then     content=$(cat file) # Set $content to the content of the file fi
[ -s nonemptyfile ]	file 'nonemptyfile' exists and has a size of more than 0 bytes.	if [ -s logfile ]; then     gzip logfile    # Backup the old logfile     touch logfile # before creating a fresh one. fi
[ -S socket ]	file 'socket' exists and is a socket.	A socket file is used for inter-process communication, and features an interface similar to a network connection. if [ -S /var/lib/mysql/mysql.sock ]; then     mysql --socket=/var/lib/mysql/mysql.sock # See this MySQL tip fi
[ -t openterminal ]	file descriptor 'openterminal' exists and refers to an open terminal.	Virtually everything is done using files on Linux/UNIX, and the terminal is no exception. if [ -t /dev/pts/3 ]; then     echo -e "\nHello there. Message from terminal $(tty) to you." > /dev/pts/3 # Anyone using that terminal will actually see this message! fi
[ -u suidfile ]	file 'suidfile' exists and is set-user-ID.	Setting the suid-bit on a file causes execution of that file to be done with the credentials of the owner of the file, not of the executing user. if [ -u executable ]; then     echo "Running program executable as user $(ls -l executable | awk '{ print $3 }')." fi
[ -w writeablefile ]	file 'writeablefile' exists and is writeable to the script.	if [ -w /dev/hda ]; then     grub-install /dev/hda fi
[ -x executablefile ]	file 'executablefile' exists and is executable for the script.	Note that the execute permission on a directory means that it's searchable (you can see which files it contains). if [ -x /root ]; then     echo "You can view the contents of the /root directory." fi
[ newerfile -nt olderfile ]	file 'newerfile' was changed more recently than 'olderfile', or if 'newerfile' exists and 'olderfile' doesn't.	if [ story.txt1 -nt story.txt ]; then     echo "story.txt1 is newer than story.txt; I suggest continuing with the former." fi
[ olderfile -ot newerfile ]	file 'olderfile' was changed longer ago than 'newerfile', or if 'newerfile' exists and 'olderfile' doesn't.	if [ /mnt/remote/remotefile -ot localfile ]; then     cp -f localfile /mnt/remote/remotefile # Make sure the remote location has the newest version of the file, too fi
[ same -ef file ]	file 'same' and file 'file' refer to the same device/inode number.	if [ /dev/cdrom -ef /dev/dvd ]; then     echo "Your primary cd drive appears to read dvd's, too." fi
2. String-based conditions:
Condition	True if	Example/explanation
[ STRING1 == STRING2 ]	STRING1 is equal to STRING2.	if [ "$1" == "moo" ]; then     echo $cow # Ever tried executing 'apt-get moo'? fi Note: you can also use a single "=" instead of a double one.
[ STRING1 != STRING2 ]	STRING1 is not equal to STRING2.	if [ "$userinput" != "$password" ]; then     echo "Access denied! Wrong password!"     exit 1 # Stops script execution right here fi
[ STRING1 \> STRING2 ]	STRING1 sorts after STRING2 in the current locale (lexographically).	The backslash before the angle bracket is there because the bracket needs to be escaped to be interpreted correctly. As an example we have a basic bubble sort: (Don't feel ashamed if you don't understand this, it is a more complex example)   array=( linux tutorial blog ) swaps=1 while (( swaps > 0 )); do     swaps=0     for (( i=0; i < (( ${#array[@]} - 1 )) ; i++ )); do         if [ "${array[$i]}" \> "${array[$(( i + 1 ))]}" ]; then # Here is the sorting condition             tempstring=${array[$i]}             array[$i]=${array[$(( i + 1 ))]}             array[$(( i + 1 ))]=$tempstring             (( swaps=swaps + 1 ))         fi     done done echo ${array[@]} # Returns "blog linux tutorial"
[ STRING1 \< STRING2 ]	STRING1 sorts before STRING2 in the current locale (lexographically).
[ -n NONEMPTYSTRING ]	NONEMPTYSTRING has a length of more than zero.	This condition only accepts valid strings, so be sure to quote anything you give to it. if [ -n "$userinput" ]; then     userinput=parse($userinput) # Only parse if the user actually gave some input. fi Note that you can also omit the "-n", as brackets with just a string in it behave the same.
[ -z EMPTYSTRING ]	EMPTYSTRING is an empty string.	This condition also accepts non-string input, like an uninitialized variable: if [ -z $uninitializedvar ]; then     uninitializedvar="initialized" # -z returns true on an uninitialized variable, so we initialize it here. fi
Double-bracket syntax only: [[ STRING1 =~ REGEXPATTERN ]]	STRING1 matches REGEXPATTERN.	If you are familiar with Regular Expressions, you can use this conditions to perform a regex match. if [[ "$email" =~ "\b[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}\b" ]]; then     echo "\$email contains a valid e-mail address." fi
3. Arithmetic (number-based) conditions:
Condition	True if	Example/explanation
[ NUM1 -eq NUM2 ]	NUM1 is EQual to NUM2.	These conditions only accept integer numbers. Strings will be converted to integer numbers, if possible. Some random examples: if [ $? -eq 0 ]; then # $? returns the exit status of the previous command     echo "Previous command ran succesfully." fi if [ $(ps -p $pid -o ni=) -ne $(nice) ]; then     echo "Process $pid is running with a non-default nice value" fi if [ $num -lt 0 ]; then     echo "Negative numbers not allowed; exiting..."     exit 1 fi
[ NUM1 -ne NUM2 ]	NUM1 is Not Equal to NUM2.
[ NUM1 -gt NUM2 ]	NUM1 is Greater Than NUM2.
[ NUM1 -ge NUM2 ]	NUM1 is Greater than or Equal to NUM2.
[ NUM1 -lt NUM2 ]	NUM1 is Less Than NUM2.
[ NUM1 -le NUM2 ]	NUM1 is Less than or Equal to NUM2.
4. Miscellaneous conditions:
Condition	True if	Example/explanation
[ -o shelloption ]	shell option 'shelloption' is enabled.	Shell options modify the behaviour of bash, except a few unmodifiable ones that indicate the shell status. if [ ! -o checkwinsize ] # An exclamation mark inverts the outcome of the condition following it     echo "Shell option checkwinsize is disabled; enabling it so you can resize you terminal window without problems."     shopt -s checkwinsize # This shell option is modifiable fi if [ -o login_shell ]; then     echo "This a a login shell." # This shell option is not modifiable fi

With the double-parenthesis syntax, you can use the following conditions:

5. Double-parenthesis syntax conditions:
Condition	True if	Example/explanation
(( NUM1 == NUM2 ))	NUM1 is equal to NUM2.	These conditions only accept integer numbers. Strings will be converted to integer numbers, if possible. Some random examples: if (( $? == 0 )); then # $? returns the exit status of the previous command     echo "Previous command ran succesfully." fi if (( $(ps -p $pid -o ni=) != $(nice) )); then     echo "Process $pid is running with a non-default nice value" fi if (( $num < 0 )); then     echo "Negative numbers not allowed; exiting..."     exit 1 fi
(( NUM1 != NUM2 ))	NUM1 is not equal to NUM2.
(( NUM1 > NUM2 ))	NUM1 is greater than NUM2.
(( NUM1 >= NUM2 ))	NUM1 is greater than or equal to NUM2.
(( NUM1 < NUM2 ))	NUM1 is less than NUM2.
(( NUM1 <= NUM2 ))	NUM1 is less than or equal to NUM2.

After this dry information load, here's a bit of explanation for those who want to know more... 

Diving a little deeper

I said I'd tell more about the fact that if essentially checks the exit status of commands. And so I will. The basic rule of bash when it comes to conditions is 0 equals true, >0 equals false. That's pretty much the opposite of many programming languages where 0 equals false and 1 (or more) equals true. The reason behind this is that shells like bash deal with programs a lot. By UNIX convention, programs use an exit status for indicating whether execution went alright or an error occured. As a succesful execution doesn't require any explanation, it needs only one exit status. If there was a problem, however, it is useful to know what went wrong. Therefore, 0 is used for a succesful execution, and 1-255 to indicate what kind of error occured. The meaning of the numbers 1-255 differs depending on the program returning them.

Anyway, if executes the block after then when the command returns 0. Yes, conditions are commands. The phrase [ $foo -ge 3 ] returns an exit status, and the other two syntaxes as well! Therefore, there's a neat trick you can use to quickly test a condition:

[ $foo -ge 3 ] && echo true

In this example, "echo true" is only executed if "[ $foo -ge 3 ]" returns 0 (true). Why is that, you might ask. It's because bash only evaluates a condition when needed. When using the and combining expression, both conditions need to be true to make the combining expression return true. If the first condition returns false, it doesn't matter what the second one returns; the result will be false. Therefore, bash doesn't evaluate the second condition, and that's the reason why "echo true" is not executed in the example. This is the same for the or operator ("||"), where the second condition is not evaluated if the first one is true.

Well, so far for the diving. If you want to know even more, I'd like to point you to the Advanced Bash-Scripting Guide and maybe the Bash Reference Manual.

Conclusion

In this tutorial, you've been able to make a start at understanding the many possibilities of conditions in bash scripting. You've been able to read about the basic rules of writing and using conditions, about the three syntaxes and their properties, and maybe you took the opportunity to dive a little deeper. I hope you enjoyed the reading as much as I enjoyed the writing. You can always return here to look up conditions in the table (bookmark that link to see the table directly), or to refresh your knowledge. If you have any suggestions, additions or other feedback, feel free to comment. Thanks for reading and happy scripting!